Carbon Steel Pipe Fittings

Schedule 10 Carbon Steel Tee Fittings and CS Elbow manufacturer in India

What Is Carbon Steel Pipe Fittings?
Carbon pipe fittings are modules designed with higher carbon content. The versatile carbon grades play a crucial role in influencing the characteristics of the flow in the system. The higher the carbon content in these fittings, the superior is their resistance to corrosion and oxidation across stress-induced systems. The high-strength fittings can be employed in different pressure and temperature systems. They can be readily welded or threaded in place following standard procedures.

What Are Carbon Steel Buttweld Fittings Used For?
Carbon pipe fittings are a category of weldable pipe fittings. These fittings play a crucial role in changing the direction of the flow, reducing the volume, or stopping the flow across specific systems. The influential fittings are a good choice in domestic, industrial, and commercial applications where the modules have to supply fluids and gases at high intensity. They are also employed in sanitary applications where the surrounding environment emits highly corrosive and reducing acids and media.

Difference Between Low Temperature Carbon Fittings And High Temperature Carbon Steel Pipe
Carbon fittings are versatile components that are designed for use in different temperatures and conditions. Low temperature carbon fittings are utilized in low temperatures up to -46 degrees C. Similarly, high temperature carbon fittings are designed to function in elevated temperatures up to 540 degrees C.

Carbon Steel Concentric Reducer Vs Carbon Steel Eccentric Reducer
Carbon reducers are components that are employed in connecting piping modules of different shapes. These modules are classified as concentric or eccentric reducers.

• A carbon steel concentric reducer reduces the pipe from the center, while a carbon steel eccentric reducer shrinks the pipe from the edges.
• Concentric reducers are common reducer types. Eccentric reducers are less common and are mostly used in applications where air and liquids are flowing in tandem.
• Concentric reducers have a matching centerline, while eccentric reducers exhibit a mismatched centerline.
• Eccentric reducers collect fluids if they are not aligned properly. Concentric reducers are well aligned and allow for a smooth passage of flow.

ISO Certified Manufacturer of Carbon Steel Buttweld Caps and Carbon Steel 90° Long Radius Elbow according to ANSI B16.9

Table of Contents

• Carbon Steel Pipe Fittings Specification
• Carbon Steel Fittings Price List
• Carbon Steel Buttweld Fitting Grades
• Forging Machines of CS Buttweld Pipe Fittings
• Carbon Steel Elbow weight chart
• Carbon Steel Fittings pressure rating
• Schedule 10 Carbon Steel Pipe Fittings dimensions
• Carbon Steel 90 Degree Elbow dimensions
• 3LPE Coating for Carbon Steel Buttweld Pipe Fittings
• Carbon Steel Tee dimensions
• Types of Carbon Steel Buttweld Fittings
• Carbon Steel Concentric Reducer weight chart

• Carbon Steel Elbow weight chart
• Schedule 10 Carbon Steel Pipe Fittings 3 Layer Coatings
• Carbon Steel Buttweld Fittings Dimension Table
• Carbon Steel Pipe Fitting Testing Requirments
• CS Pipe Fittings Standards
• Carbon Steel Fittings Hs Code
• Carbon Steel Pipe Fittings Documentations
• Carbon Steel 90 Degree Elbow Chemical Composition
• CS Buttweld Fittings mechanical properties
• ASME B16.9 Carbon Steel Elbow Density
• SCH 10 Carbon Steel Weld Fittings Application

Carbon Steel Pipe Fittings Specification

Buy Carbon Steel Buttweld Pipe Fittings and CS 180 degree Buttweld Long Radius Elbow, Concentric Reducer, End Caps in custom size at no extra cost

Specification	Carbon Steel Pipe Fittings
List Of Thickness	Schedule 5, Schedule 80, Schedule 120, Schedule 140, Schedule 180, Schedule 50, Schedule 40, Schedule 160, Schedule 100, Schedule 60, Schedule 10
Dimensions And Standard	ASME B16.28 ASME/ANSI B16.9 MSS-SP-43 ANSI B16.11
Supporting Material	Ring Joint/ Gasket/ Flange Bolts
Type Of Connection	End Bell/ Threaded/ Flange/ Clamp End
Fitting Coating Faces	Zinc Plated Anti-rust Paint Cold and Hot Dip Galvanized Oil Black Paint Yellow Transparent
Machining Equipment Of AS Elbow 90:	Electric Bevelling machine Bending, Press, Pushing
Surface Treatment	Sand Rolling / Sand Blasting
Manufacturer Size	Buttweld ½ NB to 120 Inch NB Seamless ½ to 24 Inch Welded ½ to 120 Inch Two Joint / Two Halve Fittings 6 to 48 Inch
Bending Radius	R=8D, 10D, 3D, 6D, 1D, 5D, 2D or Custom
Our service	Cryogenic Services,hydrogen Services Sulphide Stress Cracking Test Hydrogen Induce Cracking Test Post Weld Heat Treatment Sour Service Hydro Test Ultrasonic Test Impact Test As Per Ug 84 Helieum Leak Test Nace Mr 01 75 Macro Structure Analysis Magnetic Partius Test Dye Peniterant Test
Coating	Oil Black Paint, Cold and Hot Dip Galvanized, Yellow Transparent, Zinc Plated, Anti rust Paint
Production Technique	Forged, Heat treated and machined

Carbon Steel Fittings Price List

$ 7.72/ Pcs

Carbon Sa 420 Gr.wpl6 Dn 400x350 Sch Xs Concentric Reducer

$ 7.84/ Pcs

Carbon Sa 420 Gr.wpl6 Dn 300x200 Sch 120 Eccentric Reducer

$ 17.93/ Pcs

Carbon Welded (B/w) Pipe Fitting

$ 3.71/ Pcs

Carbon Gr A234 Wpb Stub End

$ 2.03/ Pcs

Carbon Dn 50x40 Unequal Tee Sch 40x80 Sa234 Gr.wpb

$ 5.30/ Pcs

Carbon Dn 80 90 Degree Elbow Sch 160 Sa234 Gr.wpb

Carbon Steel Buttweld Fitting Grades

ASTM A234 WPB Fittings

ASTM A420 WPL6 Fittings

Forging Machines of CS Buttweld Pipe Fittings

• Hydraulic Press 300 Tons Capacity
• Radial Driling Machine
• Conventional Machine
• Elbow Cold Forming Machines
• CNC Lath
• Heat Treatment For Forged Fitting
• Elbow Beveling Machine
• Oil Fired Heat Treatment Furnace
• Hydraulic Press 150 Tons Capacity
• Tee Beveling Machine
• Portable Temperature Indicator
• Tee Cold Forming Machines

Carbon Steel Elbow weight chart

Normal Pipe Sizes	Weight In Kilogram (KG)	Weight In LBS
1/2	0.04	0.09
3/4	0.04	0.09
1	0.11	0.25
1.1/4	0.17	0.38
1.1/2	0.18	0.4
2	0.37	0.81
2.1/2	0.79	1.75
3	1.19	2.63
3.1/2	1.59	3.5
4	2.04	4.5
5	3.4	7.5
6	5.44	12
8	10.43	23
10	19.5	43
12	28.12	62
14	36.29	80
16	45.36	100
18	57.15	126
20	72.57	160
22	89.36	197
24	107.95	238
26	124.74	275
30	166.47	367
36	240.86	531

Carbon Steel Fittings pressure rating

Temperature Ratings		Types Of Pressure Ratings Class
		Class 150#	Class 300#
			1/4 - 1 (Inch)	1 1/4 - 2 (Inch)	2 1/2 - 3 (Inch)
(oF)	(oC)
-20 to 150	-29 to 66	300	2000	1500	1000
200	93	265	1785	1350	910
250	121	225	1575	1200	825
300	149	185	1360	1050	735
350	177	150	1150	900	650
400	204	-	935	750	560
450	232	-	725	600	475
500	260	-	510	450	385
550	288	-	300	300	300

Schedule 10 Carbon Steel Pipe Fittings dimensions

Normal Pipe Size	Outer Diameter	Wall Thickness	Inner Diameter
2-1/2	2.875	0.120	2.635
1	1.315	0.109	1.097
1-1/4	1.660	0.109	1.442
3/4	1.050	0.083	0.884
1-1/2	1.900	0.109	1.682
6	6.625	0.134	6.357
2	2.375	0.109	2.157
3-1/2	4.000	0.120	3.760
4	4.500	0.120	4.260
3	3.500	0.120	3.260
8	8.625	0.148	8.329

Carbon Steel 90 Degree Elbow dimensions

Manufacturer of seamless Schedule 10 Carbon Steel Pipe Fittings in Mumbai, Check CS Stub End, Flanged Tee, Split Tee, Cross, U Return Bend, 3d Bend Price list

Size In MM	Size In Inch	Radius Types	Nominal Diameter	Center-end	Center-center	Back-face
26,67	3/4	28,57	20	11,11	57,15	42,86
33,40	1	38,10	25	22,22	76,20	55,56
42,16	1 1/4	47,60	32	25,40	95,25	69,85
21,34	1/2	38,10	15	15,87	76,20	47,62
219,07	8	304,80	200	127,00	609,60	414,30
355,60	14	533,40	350	222,25	1066,80	711,20
48,26	1 1/2	57,15	40	28,57	114,30	82,55
609,60	24	914,40	600	381,00	1828,80	1219,20
60,32	2	76,20	50	34,92	152,40	106,40
508,00	20	762,00	500	317,50	1524,00	1016,00
88,90	3	114,30	80	50,80	228,60	158,75
101,60	3 1/2	133,35	90	57,15	266,70	184,15
114,30	4	152,40	100	63,50	304,80	209,55
141,30	5	190,50	125	79,38	381,00	261,90
457,20	18	685,80	450	285,74	1371,60	914,40
168,27	6	228,60	150	95,25	457,20	312,70
73,02	2 1/2	95,25	65	44,45	190,50	131,80
273,05	10	381,00	250	158,75	762,00	517,50
323,85	12	457,20	300	190,50	914,40	619,10
406,40	16	609,60	400	254,00	1219,20	812,80
558,80	22	838,20	550	342,90	1676,40	1117,60
711,20	28	1066,80	700	441,90	2133,60	1422,40

3LPE Coating for Carbon Steel Buttweld Pipe Fittings

Carbon Steel Tee dimensions

Nominal Pipe Size	Outer Daimeter	Center-End
		Run	Outlet
1/2	21.3	25	25
10	273.0	216	216
22	559.0	419	419
14	355.6	279	279
3/4	26.7	29	29
1	33.4	38	38
1 1/2	48.3	57	57
2	60.3	64	64
20	508.0	381	381
2 1/2	73.0	76	76
3	88.9	86	86
16	406.4	305	305
1 1/4	42.2	48	48
3 1/2	101.6	95	95
4	114.3	105	105
5	141.3	124	124
6	168.3	143	143
8	219.1	178	178
12	323.8	254	254
18	457.0	343	343
24	610.0	432	432

Types of Carbon Steel Buttweld Fittings

Carbon Weld Fittings

Carbon Buttweld Fittings

Carbon Fittings

Schedule 10 Carbon Pipe Fittings

SCH 10 Carbon Weld Fittings

Carbon Buttweld Pipe Fittings

Carbon Buttweld Caps

CS Elbow

Carbon Reducer

Carbon Concentric Reducer

CS Pipe Cap

Carbon Stub End

CS Tee

Carbon Cross

CS 90 Degree Elbow

Carbon Pipe Bend

CS Split Tee

Carbon Flanged Tee

Carbon Steel Concentric Reducer weight chart

Specialized manufacturer of Carbon Steel Elbow, Buttweld Reducers and CS Pipe Fittings in Mumbai, check dimension, Weight and price list

Nominal Pipe Size	Weight In Kilogram	Weight In LBS
3/4-1/2	0.08	0.17
1-3/4	0.18	0.4
1-1/2	0.18	0.4
1.1/4-1	0.23	0.5
3/4-3/8	0.07	0.15
2.1/2-2	0.68	1.5
1.1/4-3/4	0.18	0.4
1.1/4-1/2	0.18	0.4
1.1/2-1	0.28	0.62
1.1/2-3/4	0.24	0.54
1.1/2-1/2	0.23	0.5
1.1/2-1.1/4	0.32	0.7
2-1.1/2	0.41	0.9
2-1.1/4	0.38	0.84
2-1	0.34	0.76
2-3/4	0.32	0.7
2.1/2-1.1/2	0.63	1.38
2.1/2-1.1/4	0.57	1.25
2.1/2-1	0.57	1.25
3-2.1/2	0.91	2
3-2	0.82	1.8
3-1.1/2	0.77	1.7
3-1.1/4	0.73	1.6
3.1/2-3	1.43	3.15
3.1/2-2.1/2	1.31	2.88
3.1/2-2	1.25	2.75
3.1/2-1.1/2	1.13	2.5
3.1/2-1.1/4	1.09	2.4
4-3.1/2	1.59	3.5
4-3	1.53	3.38
4-2.1/2	1.47	3.25
4-2	1.36	3
4-1.1/2	1.31	2.88
5-4	2.72	6
5-3.1/2	2.61	5.75
5-3	2.49	5.5
5-2.1/2	2.38	5.25
5-2	2.27	5
6-5	3.86	8.5
6-4	3.74	8.25
6-3.1/2	3.74	8.25
6-3	3.63	8
6-2.1/2	3.29	7.25
8-6	5.99	13.2
8-5	5.44	12
8-4	4.99	11
8-3.1/2	4.99	11
10-8	9.98	22
10-6	9.75	21.5
10-5	9.53	21
10-4	9.07	20
12-10	15.42	34
12-8	14.51	32
12-6	14.06	31
12-5	13.61	30
14-12	27.22	60
14-10	26.85	59.2
14-8	26.54	58.5
14-6	26.31	58
16-14	32.21	71
16-12	31.75	70
16-10	31.52	69.5
16-8	31.07	68.5
16-6	-	-
18-16	38.56	85
18-14	38.1	84
18-12	37.65	83
18-10	37.19	82
18-8	-	-
20-18	56.7	125
20-16	56.25	124
20-14	55.34	122
20-12	54.43	120
20-10	-	-
20-8	-	-
22-20	64.41	142
22-18	62.6	138
22-16	59.42	131
22-14	55.79	123
22-12	-	-
22-10	-	-
24-22	-	-
24-20	68.04	150
24-18	67.13	148
24-16	65.77	145
24-14	-	-
24-12	-	-
24-10	-	-
26-24	93.89	207
26-22	90.72	200
26-20	86.18	190
26-18	82.55	182
26-16	-	-
26-14	-	-
26-12	-	-
28-26	101.6	224
28-24	97.98	216
28-22	95.25	210
28-20	90.26	199
30-28	109.32	241
30-26	105.23	232
30-24	101.6	224
30-22	99.79	220
30-20	99.79	220

Carbon Steel Elbow weight chart

Normal Pipe Size	Weight In LBS	Weight In Kilogram
1/2	0.09	0.04
1	0.25	0.11
1.1/4	0.38	0.17
16	100	45.36
1.1/2	0.4	0.18
3/4	0.09	0.04
2	0.81	0.37
2.1/2	1.75	0.79
3	2.63	1.19
14	80	36.29
20	160	72.57
4	4.5	2.04
5	7.5	3.4
6	12	5.44
8	23	10.43
10	43	19.5
3.1/2	3.5	1.59
12	62	28.12
18	126	57.15
22	197	89.36
24	238	107.95
26	275	124.74
30	367	166.47
36	531	240.86

Schedule 10 Carbon Steel Pipe Fittings 3 Layer Coatings

• Epoxy primer coating
• Anti-corrosion Coating
• Copolymer adhesive

Carbon Steel Buttweld Fittings Dimension Table

Outside Diameter		Nominal Pipe Size	90° Elbow		180° Returns		45° Elbow
		(inch)	Long Radius	Short Radius	Long Radius		Long Radius
(MM)	(inch)		Center to Face (inch)	Center to Face (inch)	Center to Center (inch)	Back to face (inch)	Center to Face (inch)	Radius (inch)
88.9	3.500	3	4 1/2	3	9	6 1/4	2	6
101.6	4.000	3 1/2	5 1/4	3 1/2	10 1/2	7 1/4	2 1/4	7
114.3	4.500	4	6	4	12	8 1/4	2 1/2	8
141.3	5.563	5	7 1/2	5	15	10 5/16	3 1/8	10
21.3	0.840	1/2	1 1/2	–	2	1 7/8	5/8
26.7	1.050	3/4	1 1/8	–	2 1/4	1 11/16	7/16
33.4	1.315	1	1 1/2	1	3	2 3/16	7/8
42.2	1.660	1 1/4	1 7/8	1 1/4	3 3/4	2 3/4	1
48.3	1.900	1 1/2	2 1/4	1 1/2	4 1/2	3 1/4	1 1/8	3
60.3	2.375	2	3	2	6	4 3/16	1 3/8	4
73.0	2.875	2 1/2	3 3/4	2 1/2	7 1/2	5 3/16	1 3/4	5
168.3	6.625	6	9	6	18	12 5/16	3 3/4	12
219.1	8.625	8	12	8	24	16 5/16	5	12
273.1	10.750	10	15	10	30	20 3/8	6 1/4	15
323.9	12.750	12	18	12	36	24 3/8	7 1/2	18

Carbon Steel Pipe Fitting Testing Requirments

Class	Ultrasonic Examination	Liquid Penetrant Examination	Product Analysis
Class-1	100% on the finished product over the full volume (including 100% on the pipe/fogings used to make fittings) *	Externally, 100 percent, and inside, all accessible surfaces	On one sample from each heat treatment batch size
Class-2	Not required	100% on all external and internal surfaces that can be accessed.	On one sample from each heat treatment batch size
Class-3	Not required	Not required	On one sample from each heat treatment batch size

CS Pipe Fittings Standards

• ASME B16.9
• ASME B16.28
• DIN 2353
• DIN 2605-1
• P235GH
• EN 10253
• DIN 2617

Carbon Steel Fittings Hs Code

Description	HSN Code
Carbon Steel Pipe Fittings	73079990

Carbon Steel Pipe Fittings Documentations

• Quality Assurance Plan
• Guarantee Letter
• Raw Material Test Reports
• Fumigation Certificates
• NABL approved Laboratory Test Reports
• Commercial Invoice which includes HS Code
• Fumigation Certificates
• Heat Treatment Charts

Carbon Steel 90 Degree Elbow Chemical Composition

Element	Content
Carbon	0.03
Chromium	18-20
Iron	Balance
Nickeli	11-15
Manganese	2
Molybdenum	3-4
Phosphorous	0.045
Silicon	1
Sulfur	0.03

CS Buttweld Fittings mechanical properties

Properties	Metric	Imperial
Tensile strength	595 MPa	86300 psi
Yield strength	260 MPa	37700 psi
Modulus of elasticity	200 GPa	29000 ksi
Poisson’s ratio	0.27-0.30	0.27-0.30
Hardness, Rockwell B	85	85
Elongation at break (in 50 mm)	55%	55%

ASME B16.9 Carbon Steel Elbow Density

Physical Properties	Metric	Imperial
Density	7.87 g/cc	0.284 lb/in3

SCH 10 Carbon Steel Weld Fittings Application

• Chemical Equipment
• Pharmaceutical Equipment
• Sea Water Equipment
• Pulp & Paper Industry
• Petrochemicals
• Off-Shore Oil Drilling Companies
• Power Generation
• Gas Processing

Check our reference of material in these projects

Duqm Refinery and Petrochemical Industries

Oman

Lamberts
Bay

South Africa